Closets are boring, but storage is important.
- Problem: In houses and workplaces there is always some need for bulk storage space; a place for things like suitcases, old furniture, old files, boxes—all those things which you are not ready to throw away, and yet not using everyday.
- Therefore: Do not leave bulk storage till last or forget it. Include a volume for bulk storage in the building—its floor area at least 15 to 20 per cent of the whole building area—not less. Place this storage somewhere in the building where it costs less than other rooms—because, of course, it doesn’t need a finish.
- In our home: In addition to the closets described, we have some areas for bulk storage. The lower floor has an unfinished bathroom that can be used for storage. The ground level at the back door is a bare concrete floor that has little use besides storage. We also have a very large crawlspace under the house that can be used for bulk storage of items that don’t need to be temperature-controlled.
The majority of our closets and storage shelving use the Elfa system from The Container Store. It is flexible, modular, and reasonably priced. We designed a fairly comprehensive storage solution, but it is easy to add on more functionality as desired.
Let’s examine our storage shelving with a room by room tour. This won’t cover all of the storage. There are other types of storage such as built-in bookshelves, kitchen and bathroom cabinets, and garage storage. These will be addressed in more detail elsewhere.
The secondary bedrooms were the easiest. They each have a small closet and are currently unoccupied. In each closet, we added a hanging bar and shelf across the top, and then mid-way down, another hanging bar and shelf across half of the closet. Simple but functional.
In the laundry room, we added quite a bit of shelving to accommodate crafts, utility storage, and drying clothes. The original design had shelves above the washer and dryer, but after those were installed, we realized reaching above them would be difficult. It didn’t help that the dryer vent pipe added an awkward bulge in the wall. Because the Elfa system is modular, we reconfigured things at install time and moved two of the tall wall supports between the door and the washing machine. The other side of the room has utility drawers and a craft desk for using a sewing machine or spreading out crafts on. We’re also finding the desk useful for folding clothes.
The master dressing room has a corner full of shelves and hanging for our clothes. We have around 6 feet of short hang for each of us, and another 2-3 feet of long hang each. This satisfies the amount of storage space specified in the Dressing Rooms pattern. We added a couple short wire drawers for smaller clothes like socks, and some deeper wire drawers for folded items like t-shirts. One nice accessory was a set of belt hooks that attaches to the end of shelf, and has space to hang several items. We decided to go for open shelving here instead of a closed closet or wardrobe, and the platinum shelving plus walnut-look trim gives a bit of elegance to the design.
The media room uses the freestanding shelving from Elfa to avoid interfering with the sound isolation channel in the wall. The closet uses plain wire shelving to help with ventilation. It is fairly deep to accommodate the large media equipment. The open nook next to the closet is for more frequently accessed items like controllers, batteries, and video games. The shelves and drawers use wire shelving with walnut trim.
We also used Elfa in the pantry. The long wall has a series of shelves, starting at 20″ deep at the bottom, going to 16″ deep in the middle, and 12″ deep on top. This provides easy access even to items that get pushed to the back. The short wall has a few more shelves, along with some drawers for items such as produce that may not sit so nicely on shelves.
We’re quite happy with the system. We have a lot of storage space in the house, it is functional, and looks nice.